Table of Contents
Advertisement
Parameter
5.
IPv4 Subnet Mask
6.
IPv4 Default
Gateway
7.
IPv6 Address
8.
IPv6 Default
Gateway
9.
IPv6 Default
Gateway
10.
MAC Address
11.
MTU (bytes)
12.
Preferred DNS
Server
13.
Alternate DNS
Server
14.
Main NIC
15.
Server Port
16.
HTTP Port
17.
Multicast IP
18.
RTSP Service Port
19.
HTTPS Port
20.
Enable Telnet
TruVision NVR 70 User Manual
Description
Enter the subnet mask for your network so the recorder will be recognized within
the network.
Default value is 255.255.255.0.
Enter the IP address of your network gateway so the recorder will be recognized
within the network. This is typically the IP address of your router. Consult your
router user manual or contact your ISP to get the required information on your
gateway.
Default value is 192.168.1.1.
Enter the IPv6 address for the recorder. This is the IP address of the local network
to which the recorder is connected.
Default value is fe80::240:3dff:fe7e:926f/64
Enter the IPv6 address of your network gateway so the recorder will be recognized
within the network. This is typically the IP address of your router.
Enter the IPv6 address of your network gateway so the recorder will be recognized
within the network. This is typically the IP address of your router.
Displays the MAC address. The MAC address is a unique identifier of your
recorder and it cannot be changed.
Enter a value between 500 and 9676. Default is 1500.
Enter the preferred domain name server to use with the recorder. It must match
the DNS server information of your router. Check your router's browser interface
or contact your ISP for the information.
Enter the alternate domain name server to use with the recorder. It must match the
DNS server information of your router. Check your router's browser interface or
contact your ISP for the information.
Select the main LAN port when net fault tolerance or load balance mode is
selected. LAN I is default.
Select which LAN is the main route when multi-address mode is selected.
Use the server port for remote client software access. The port range is between
1024 and 65535.
Enter the server port value. The default value is 8000.
Use the HTTP port for remote internet browser access.
Enter the HTTP port value, which can be any port number that is not occupied.
The default value is 80.
Enter a D-class IP address between 224.0.0.0 to 239.255.255.255. Only specify
this option if you are using the multicast function. Some routers prohibit the use of
multicast function in case of a network storm.
The RTSP (Real Time Streaming Protocol) is a network control protocol designed
for use in entertainment and communications systems to control streaming media
servers.
Enter the RTSP port value, which can be between1 to 65535. The default value is
554.
HTTPS (Hyper Text Transfer Protocol Secure) allows a secure access to the
browser. Enter the HTTPS port value. The default port number is 443.
For Technical Support purposes only. For security reasons, the Telnet port is
disabled by default.
10BChapter 11: Network settings
63
Advertisement
Table of Contents
