Table of Contents
Advertisement
10BChapter 11: Network settings
2. Enter the required settings:
Parameter
1.
Working Mode
2.
Select NIC
3.
NIC Type
4.
IPv4 Address
62
Description
The recorder has two 10M/100M/1000M NIC cards that support net fault tolerance,
load balance, and multi-address modes. Select one of the options:
Net Fault-tolerance: When one LAN port fails, the other one takes over. This is
the default option.
Load Balance: The bandwidth is divided over the two LAN ports with one IP
address.
Multi-address: Each LAN port is separate with its own IP address. This allows
one LAN port for the IP cameras and the other for client PCs such as TruNav.
Select the LAN port that is being defined.
Network interface card (NIC) is a device used to connect the recorder to a
network. Select the NIC type used from the drop-down list.
Default value is 10/100/1000M self-adaptive.
Enter the IP address for the recorder. This is the LAN IP address of the recorder.
Default value is 192.168.1.82.
TruVision NVR 70 User Manual
Advertisement
Table of Contents
