V-Stream Encoding; Video Analytics - Interlogix TruVision 70 User Manual

5. Repeat steps 3 and 4 for each extra line of text, selecting the next string number.
6. Click Save to save the settings.

V-stream encoding

The V-stream shows all camera channels within one camera tile. V-stream is available for
remote use with the browser interface, mobile application, TruVision Navigator or third party
software implementation.
This feature is particularly useful if you have limited bandwidth available on a remote location
but still want to be able to view all camera tiles at once.
V-stream encoding can be set for up to 16 cameras.
To enable V-streaming:
1. From the menu toolbar, click
V-stream Encoding.
2. Check Enable V-stream
3. Select the desired settings for frame rate (fps) and maximum bit rate (Kbps).
4. Select the screen order of the cameras.
5. Click Save to save the settings.

Video analytics

VCA (video content analysis) is the intelligent analysis of video to detect events of interest.
When the function is enabled, the recorder can handle VCA alarms generated by Interlogix
cameras that support the VCA feature.
VCA is configured at the camera and not at the recorder. However, you can link actions to a
VCA alarm from IP cameras that support this feature.
To setup VCA alarm actions:
1. From the menu toolbar, click
VCA.
2. Select the camera for which to set up the VCA alarm.
3. Check the Enable VCA Alarm
4. Select the desired VCA type from the drop-down list.
Cross Line Detected
Perimeter Intrusion Detected
TruVision NVR 70 User Manual
Configuration >
Encoding.
Configuration >
box to enable the feature.
This function is used to detect when people, vehicles and objects cross a
pre-defined line or an area on-screen.
This function is used to detect when someone enters a pre-defined area in
the surveillance scene.
Remote Configuration
Remove Configuration
9BChapter 10: Camera setup
> Camera Setup >
> Camera Setup >
59