Table of Contents
Advertisement
11BChapter 12: Recording
5. Select the day of the week for which you want to set up the schedule.
You can define a different schedule for each day of the week.
6. Set the start and end time for recording on the selected day.
Define a time period by entering a start (left column) and end (right column) time. You can
schedule up to eight time periods.
Note: Time periods defined cannot overlap.
- Or -
Click
All Day
to record all day.
7. Select a recording type.
This setting instructs the recorder to begin recording when an alarm is triggered. The
recording type can be based on time and triggered by motion detection and/or an alarm. If
set to TimeLapse (TL-Hi or TL-Lo), the recorder records continuously.
8. Repeat steps 5 to 7 for other days of the week or to copy the schedule settings to another
day.
To copy the current schedule settings to another day of the week, click Copy.
9. Click
OK
to save settings for the selected camera.
10. Repeat steps 4 to 9 for the other cameras.
11. Click
Save
to save the settings and
The recording schedule window appears showing the schedule selected (see Figure 19 on
page 72 for an example).
Auto archiving
You can schedule the recorder to automatically archive recordings at set interval times to an
external storage device. You can also select the cameras and recording types to auto archive
as well as define how the system responds when the storage device becomes full.
74
OK
to return to the schedule window.
TruVision NVR 70 User Manual
Advertisement
Table of Contents
