Table of Contents
Advertisement
Figure 16: ezDDNS setup window
Note: You cannot have two recorders with the same host name.
To set up DDNS:
1. From the menu toolbar, click
> DDNS.
2. Check the
Enable DDNS
3. Select one of the DDNS types listed:
ezDDNS: Click the
host name is specified, the DDNS will allocate one automatically.
The maximum length for the host name field is 64 characters. This limit does not include
tvn-ddns.net. An example of a host name could be max64chars.tvr-ddns.net.
- Or -
DynDNS: Select
domain name field, enter the domain name obtained from the DynDNS web site. Then enter
your user name and password registered in the DynDNS network.
For example:
Server address: members.dyndns.org
Domain: mycompanydvr.dyndns.org
User name: myname
Password: mypassword
- Or -
NO-IP: Enter server address (for example, dynupdate.no-ip.com). In the host name field,
enter the host obtained from the NO-IP web site. Then enter the user name and password
that are registered with the No-IP network.
TruVision NVR 70 User Manual
Configuration
box to enable this feature.
Get URL
button. The URL address to access the unit is displayed. If no
DynDNS
and enter the server address for DynDNS. In the recorder
>
Remote Configuration
10BChapter 11: Network settings
>
Network Settings
65
Advertisement
Table of Contents
