S.m.a.r.t. Settings - Interlogix TruVision 70 User Manual

14BChapter 15: Storage management
4. Select the channels to which the dual stream set up applies.
Note: Changing the storage mode will cause the system to restart.
5. Click Save to save the settings.

S.M.A.R.T. settings

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) reports on a variety of hard
drive attributes. It helps ensure that the HDD is functioning properly at all times while protecting
video stored on the hard drive.
Note: The recorder with RAID functionality does not support S.M.A.R.T.
To view the S.M.A.R.T. information of a HDD:
1. From the menu toolbar, click
Management > S.M.A.R.T. Settings.
2. Select the HDD whose data you want to see. A detail listing of S.M.A.R.T. information is
displayed.
96
Configuration > Remote Configuration > Storage
TruVision NVR 70 User Manual