Table of Contents
Advertisement
2. Click
Add
to enter the Add User window.
3. Enter the new user's name and password. Both the user name and password can have up
to 16 alphanumeric characters. You will be shown the security level of the new password:
Low, Medium or High. Confirm the new password.
4. Select the new user's access level: Operator or Guest. Default is Guest.
5. Enter the user's MAC address to let the user access the recorder from a remote computer
with this MAC address.
6. Click
OK
to save the settings and return to the previous window.
7. Define the user's permissions.
Check the required access privileges for basic permissions and camera operation. See
"Customizing a user's access privileges" below for the permission descriptions for each
permission group.
8. Click
OK
to save the settings. The list of users is shown.
Customize a user's access privileges
Only an administrator can allocate access privileges to Operator and Guest users. The access
privileges can be customized for each user's needs. The administrator's access privileges
cannot be changed.
There are two types of privilege settings: Basic Permission and Camera Operation.
Basic permission settings
By default, only remote log search and two-way audio are enabled for operators, and only the
remote log search is enabled for guests.
•
Remote Log Search: Remotely view logs that are saved on the recorder.
•
Remote Parameter Settings: Remotely configure parameters and import configuration.
•
Remote Camera Management: Remotely enable and disable channels.
•
Remote Video Output Control: For future use.
•
Two-Way Audio: Use two-way audio between the remote client and the recorder.
TruVision NVR 70 User Manual
15BChapter 16: User management
101
Advertisement
Table of Contents
