Interlogix TruVision 70 User Manual page 53

Table of Contents

Advertisement

Figure 14: IP camera window
Table 5: Description of the IP camera window
Option
1.
Manual Add
2.
Modify
3.
Delete
4.
Search/Add
5.
Advanced Settings
6.
Custom Protocol
7.
Refresh
To search the network and add an IP camera:
1. From the menu toolbar, click
for any supported IP cameras located in the recorder LAN.
2. Check the boxes of the cameras that you want to add to the recorder.
3. Click
OK
to add the selected cameras to the list of devices in the recorder. The cameras are
automatically added to the end of the list of devices.
Note: If cameras still have default settings, they might have the same IP addresses. This
creates an IP conflict. Use the Edit button to assign a different IP address to each camera.
To manually add an IP camera:
1. From the menu toolbar, click
2. Click
Manual
Add. In the pop-up window, enter the camera details such as the IP camera
address/domain, protocol, management port, user name and password. Click OK.
The camera is added to the end of the list of devices.
Note: Only one camera can be manually added at a time.
TruVision NVR 70 User Manual
Description
Manually add an IP camera to the recorder system without searching for it. Enter its
parameters: IP Camera No., Registration Mode, IP Camera Address, Protocol,
Management Port, User Name, Password, and Transfer Protocol.
Change the parameters of a selected IP camera from the list.
Delete the selected IP camera from the list.
Search the network for available IP cameras and add an IP camera to the recorder
system. Select a camera, or cameras, from the list and click OK.
The camera parameters shown are: IP Camera Address, Channel Number,
Protocol, Management Port, Subnet Mask, MAC Address, Serial No., Firmware
Version.
Synchronize all supported TruVision and UltraView IP cameras passwords.
Configure custom RTSP streams.
Update the information displayed on a camera in the recorder device list.
Configuration
Camera Setup
>
IP Camera Status
>
IP Camera
Status.
9BChapter 10: Camera setup
>
Search/Add
to search
51

Advertisement

Table of Contents
loading

Table of Contents