Camera Tamper - Interlogix TruVision 70 User Manual

The number of privacy masks supported depends on the camera model.
To setup a privacy mask:
1. From the menu toolbar, click
Privacy Mask.
2. Select the camera for privacy masking.
3. Check the Enable Privacy Mask
4. Set up the mask area.
Click the Start Draw
camera view window over the desired area. Click the
you want to draw another privacy mask, click
To delete all masks, click
5. Click Save to save the settings.

Camera tamper

You can setup the recorder to alert you when the camera view has changed such as when
someone has deliberately blocked the camera view by spraying paint on the lens or by moving
the camera. You can select a specific area of the camera screen to detect tampering.
Note: It is strongly recommended not to configure for video tampering when using PTZ dome
cameras.
TruVision NVR 70 User Manual
Configuration
box to enable the feature.
button and, using the mouse, click and drag a privacy-mask box in the
Clear All. You cannot delete individual privacy masks.
> Remote Configuration
Stop Draw button to stop drawing. If
Start Draw again.
9BChapter 10: Camera setup
> Camera Setup >
57