Table of Contents
Advertisement
13BChapter 14: Device management
Figure 22: General settings of the recorder
Table 7: Description of the Monitor setup window: General settings
Option
1.
Device Name
2.
eSATA
3.
Start Wizard upon login
Using an eSATA recording device
You can use an external storage device, such as an eSATA HDD, to backup video or to add its
recording capacity to that of the recorder itself. If you change this option, you must reboot the
recorder to implement the change.
To define how the eSATA device is used:
1. From the menu toolbar, click
Management
>
General
2. Under eSATA, select one of the two options:
Record and Capture: Extend the recording capacity of the recorder.
Export: Backup data onto an eSATA backup device.
Note: If the external storage device is part of the total internal capacity of the recorder, then
it is no longer available for backing up video.
3. Click
Apply
to save the settings.
86
Description
Define the recorder name. The default name is TVN 70.
Click the edit box and enter the new name from the soft keyboard.
Configure the e-SATA device to record or archive video.
This will immediately start the wizard. The system is not rebooted. Default is
Disable.
Configuration
>
Settings.
Remote Configuration >Devive
TruVision NVR 70 User Manual
Advertisement
Table of Contents
