Manual Trigger; Buzzer Settings - Interlogix TruVision User Manual

Chapter 13: Alarm and event setup
3. Select a timeout option between 5 and 600 seconds or select "Manually Clear".
The timeout setting lets you define how long an alarm signal remains active after the
alarm has ended. If you select
it is manually acknowledged by pressing the alarm button on the front panel or
remote control (see "Triggering or clearing alarm outputs manually" below).
4. Select the recording schedules for the alarm output.
Click the Actions
the day when motion can be recorded. You can schedule up to eight time periods in
a day. Default is 24 hours.
Click Apply to save the settings. Click
the week and holiday period.
Note: The time periods defined cannot overlap.
5. Click OK to return to the alarm output window.
6. Click Copy to copy these settings to other cameras, if required, and then click
Apply to save the changes.
7. Click Exit to return to live view.

Manual trigger

The manual trigger menu allows you to manually trigger outputs of the recorder.
To trigger or clear alarm outputs manually:
1. From the menu toolbar, click
2. Select the desired alarm output and click the following buttons:
Trigger / Clear: Trigger an alarm output or stop an alarm output. As there is only
one alarm output available, the "Trigger All" button just triggers the one output.
Clear All: Stop all alarm outputs at once.
3. Click Exit to return to live view. The alarm is silenced.
- Or -
Press the Alarm

Buzzer settings

When an alarm is triggered by the system or a camera, the recorder can be set up to
respond with a warning buzzer. You can modify the time during which the warning
buzzer sounds for both system and camera alarm. Select
Buzzer Settings and select a buzzer time limit for the system and camera alarms.
Select Mute, 5 s, 10 s, 20 s, 30 s, 60 s, 120 s, 240 s, or Constant. Default is mute.
92
Manually
button and select the day of the week and the time periods during
Alarm & Event Setup
button on the front panel or remote control. The alarm is silenced.
Clear, the alarm signal remains active until
Copy to copy the settings to other days of
> Manual
Alarm & Event Setup >
Trigger.
TruVision DVR 12HD User Manual