Chapter 4: Recording
5. Click
to lock a file. Click again to unlock.
6. Click
to return to live view.
Cancel
Setting the HDD to read-only
When you set an HDD to read-only, recorded video files cannot be written to the
HDD. If multiple HDDs are used, the DVR automatically records to the next HDD
not set to read-only.
To set a HDD to read-only:
1. Click the
System Setting
2. Click
Hard Disk
3. Select the HDD you want to set to read-only.
4. Check
Read
only.
5. Click
to save the settings. The HDD is now read-only.
Apply
In order to enable recordings on that particular HDD again, you must
Note:
set the HDD status back to R/W (Read/ Write).
Capturing text insertions
The DVR supports Point-of-Sale (POS) and ATM text insertion via the UTC
ProBridge accessory connected to the RS-232 port on the DVR.
The feature is currently only available via the browser (see "Capturing text
insertions" on page 120).
24
icon in the menu toolbar.
to set up the HDD parameters.
TruVision DVR 12 User Manual