Ptz Preset And Tours - Interlogix TruVision 21 User Manual

Chapter 5: Live View
To quickly zoom in/out on a camera image:
1. Left-click the mouse on the desired camera. The live view toolbar appears.
2. Click the digital-zoom icon. The digital view window appears.
3. Left-click the mouse and drag the red square to the area of interest, or press the
arrow buttons on the front panel to position the red square. The selected area is
magnified.
4. To exit digital zoom, right-click the mouse.

PTZ preset and tours

When in live view you can quickly call up the list of existing presets, preset tours, and
shadow tours by using the front panel, remote control, mouse, and keypad.
Front panel Press Enter. PTZ control panel appears.
Mouse Left-click the mouse on the desired camera image. The live view toolbar appears.
Click the PTZ control icon
Remote control Press the OK button. The PTZ control panel appears.
Keypad Press the Enter
If the display was in multiview format, it changes to full-screen format for the selected
camera. See Figure 14 below for a description of the PTZ control panel.
Figure 14: PTZ control panel
Table 9: Description of the PTZ control panel
Name
1. Directional pad/auto-
scan buttons
32
to enter PTZ mode. The PTZ control panel appears.
button on the keypad.
Description
Controls the movements and directions of the PTZ. The center
button is used to start auto-pan by the PTZ dome camera.
TruVision NVR 21 (SP) User Manual