Et 200S Assembling And Wiring Up - Siemens Simatic ET 200S Operating Instructions Manual

Brief instructions on commissioning ET 200S
2.2 Commissioning on PROFINET IO
2.2.2

ET 200S assembling and wiring up

Installing the DIN rail
1. Install the DIN rail (35 x 7.5 mm or 15 mm, length = at least 210 mm) on a solid surface.
2. Start from the left with the installation of the individual modules on the DIN rail (hook in -
2-12
swivel in - slide to left). Adhere to the following sequence:
– Interface module IM151-3 PN
– TM-P15N23-A1 terminal module
– 4 x TM-E15N24-A1 terminal module
– TM-P15N23-A1 terminal module
– 4 x TM-E15N24-A1 terminal module
– Terminating module
Operating Instructions, 12/2005, A5E00515771-03
ET 200S