Siemens Simatic ET 200S Operating Instructions Manual page 5

Manual
Positioning ET 200S
Technological Functions ET 200S
Serial Interface Modules ET 200S
Fail-safe Modules
Weighing technology for the ET 200S
The manuals are available on the Internet in German, English, French, Spanish and Italian (see Service & Support on the
Internet).
only German, English and French
1
only German and English
2
Guide
The manual contains the following guides which provide quick access to the specific
information you need:
• At the beginning of the manual you will find a complete table of contents and a list of the
• A heading indicating the contents of each section is provided in the left-hand column on
• Following the appendix, you will find a glossary in which important technical terms used in
• Finally, a comprehensive index allows quick access to information on specific subjects.
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
figures and tables that appear in the manual.
each page of each chapter.
the manual are defined.
Table of Contents
1STEP 5 V/204 kHz
•
1POS INC/Digital
•
1POS INC/Analog
•
1POS SSI/Digital
•
1POS SSI/Analog
•
1POS UNIVERSAL/Digital
•
1COUNT 24 V/100 kHz
•
1COUNT 5 V/500 kHz
•
1SSI
•
2PULSE
•
1SI 3964/ASCII
•
1SI MODBUS/USS
•
4/8 F-DI 24 VDC PROFIsafe
•
4 F-DO DC24/2A PROFIsafe
•
SIWAREX CS
•
1
Hardware design and installation
–
Weighing functions
–
Instructions
–
Reports and diagnostics
–
Programming with
–
SIWAREX CS
• 2
Hardware design and installation
–
Measuring function
–
Programming with
–
STEP 7
STEP 7
Preface
v