Siemens Simatic ET 200S Operating Instructions Manual page 224

Interface modules
10.1 Configuration options of the interface modules
Interface module
IM151-3 PN
IM151-3 PN HIGH
FEATURE
10-2
Option handling and status byte for power modules
•
Identification data
•
The firmware can be updated via PROFIBUS DP using
•
HWCONFIG.
Safety-related I-slave-slave-communication via
•
PROFIBUS DP
Safety-related I-slave-slave-communication for fail-safe
•
modules
Operation as DPV1-slave on the Y switching
•
Connection of the PROFINET IO via 2 RJ45 connectors
•
Operation as an I/O device
•
Bus length of the ET 200S: Max. 2 m (parameterizable)
•
Number of pluggable modules: Max. 63
•
Module types: All except fail-safe modules
•
Status byte for power modules
•
Firmware update
•
Summary of modules within one byte (packing)
•
Slot granular replacement value behavior
•
Records for IO modules
•
Structuring of linear network structures (2-port switch)
•
Connection of the PROFINET IO via 2 RJ45 connectors
•
Operation as an I/O device
•
Bus length of the ET 200S: Max. 2 m (parameterizable)
•
Number of pluggable modules: Max. 63
•
Status byte for power modules
•
Firmware update
•
Summary of modules within one byte (packing)
•
Slot granular replacement value behavior
•
Records for IO modules
•
Structuring of linear network structures (2-port switch)
•
Use of fail-safe modules
•
Applications
Transmission rate:
100 Mbps
Transmission rate:
100 Mbps
Operating Instructions, 12/2005, A5E00515771-03
ET 200S