4.10
Applying slot number labels and color identification labels
4.10
Introduction
• The slot number labels identify the individual I/O modules with a slot (1 to 63).
• The color identification plates enable an individual color coding of the terminals in
• The slot number labels and color identification labels are applied onto the terminal
Requirements
• The terminal modules are installed.
• You can only fit the slot number labels when no electronic modules are installed.
• The terminal modules should not be wired when you apply the color identification labels.
Required tools
3 mm screwdriver (for removal only)
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
accordance with company or national conventions. The color-coding plates are available
in white, red, blue, brown, yellow, yellow-green, and turquoise. Each terminal on the
terminal module can be fitted with a color identification label.
modules.
– Position of the slot number plate: below the coding element on the terminal module.
– Position of the color-coding plates: directly next to each terminal on the terminal box.
4.10 Applying slot number labels and color identification labels
Assembling
4-21