Siemens Simatic ET 200S Operating Instructions Manual page 401

Input range (rated value) / input resistance
•
Permitted input voltage (destruction limit)
Smoothing of the measured values
I&M Functions
Reading of the I&M data from the module is possible with interface modules as from a higher
MLFB or as from a higher version than described in the following table:
Interface module
IM151-1 STANDARD
IM151-1 FO STANDARD
IM151-1 HIGH FEATURE
IM151-3 PN
IM151-3 PN HIGH FEATURE
IM151-7 CPU-F
IM151-7 CPU
IM151-7 CPU FO
ET 200S
Product Information, 03/2006, A5E00743001-01
New Information About the "ET 200S Distributed I/O System Manual"
0 4.7 2AI U High Feature Analog Electronic Module (6ES7134-4LB02-0AB0)
Voltage
Sensor Selection Data
± 10 V / min. 0.8 MΩ
± 5 V / min. 0.8 MΩ
1 V to 5 V / min. 0.8 MΩ
35 V, continuous
75 V for 1 ms max., pulse duty factor 1: 20
Yes, parameters can be assigned in 4 steps by
means of digital filtering
Step
None
Weak
Medium
Strong
Order no. [MLFB]
6ES7151-1AA04-0AB0
6ES7151-1AB02-0AB0
6ES7151-1BA01-0AB0
6ES7151-3AA20-0AB0
6ES7151-3BA20-0AB0
6ES7151-7FA01-0AB0
6ES7151-7AA11-0AB0
6ES7151-7AB00-0AB0
Time constant
1 x cycle time
4 x cycle time
16 x cycle time
32 x cycle time
Product version
04
04
02
01
01
03
01
03
3-7