2Ao U High Feature Analog Electronic Module (6Es7135-4Lb02-0Ab0) - Siemens Simatic ET 200S Operating Instructions Manual

4.20 2AO U High Feature Analog Electronic Module
0
(6ES7135-4LB02-0AB0)
Properties
• 2 outputs for voltage output
• Output range:
• Isolated from the load voltage L+
• Supports isochronous operation
• Supports I&M functions
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal Assignment Terminal
1 QV
0
2 S
0+
3 M
ana
4 S
0-
A4 AUX1
A3 AUX1
ET 200S
Product Information, 03/2006, A5E00743001-01
New Information About the "ET 200S Distributed I/O System Manual"
0

4.20 2AO U High Feature Analog Electronic Module (6ES7135-4LB02-0AB0)

– ± 5 V, resolution 15 bits + sign
– ± 10 V, resolution 15 bits + sign
– 1 V to 5 V, resolution 15 bits
– Minimum time for the synchronous DP cycle (T
– Minimum conversion time of the output modules: (T
Terminal assignment for 2AO U High Feature (6ES7135-4LB02-0AB0)
Assignment
5 QV
1
6 S
1+
7 M
ana
8 S
1-
A8 AUX1
A7 AUX1
QV : Analog output voltage, channel n
•
n
S : tracer line positive, channel n
•
n+
S : tracer line negative, channel n
•
n-
M : Ground of the module
•
ana
AUX1: Protective-conductor terminal or potential bus (freely usable
•
up to 230 VAC)
): 0.7 ms
DPmin
): 0.5 ms
WAmin
Notes
3-13