Siemens Simatic ET 200S Operating Instructions Manual page 328

Index
Commissioning, 6-1
PROFIBUS DP, 6-10
PROFINET IO, 6-18
Requirements for PROFIBUS DP, 6-11
Requirements for PROFINET IO, 6-18
Commissioning the ET 200S
on PROFIBUS DP, 6-11
on PROFINET IO, 6-18
COMPACT modules, 5-22, 5-24, 5-25, 5-26, 11-2
changing type, 5-25
Error types, 8-34
Exchange, 5-26
identifying, 5-22
Mounting, 5-22
removing, 5-24
COMPACT modules and applications, 11-2
Components and protective measures, 5-4
Configuration, 6-1, 6-13
ET 200S, 6-1, 6-13
Configuration options of the COMPACT
modules, 11-2
Configuration options of the interface modules, 10-1
Connecting PROFIBUS DP, 5-15, 5-19
Connecting the Cable Shielding, 5-13
Connecting the supply voltage, 5-15, 5-19
Control interface, 7-13
Conversion time, D-7
Cycle time, D-6, D-7
D
Definition
Station status, 8-24
Diagnostics, 6-1, 8-56
after recovery of the IO device, 8-63
after STOP IO controller, 8-63
H status, 8-42
Diagnostics readout, 8-21, 8-56
Diagnostics using LED display, 8-51
Digital electronic modules, 8-7
Error types, 8-35
Digital input modules, 6-3, 6-16
Digital output modules, 6-3, 6-16
Dimensions
Additional terminal, B-9
Shield connection, B-8
Terminal module for COMPACT module with
COMPACT module inserted, B-3
Terminal modules with an electronic module
inserted, B-4
Terminal modules with inserted power
module, B-4
Terminating module, B-8
Index-2
DIN rail, 1-6, 4-2
Distributed IO systems, 1-1
DP master, 1-1
DP slave, 1-1
E
Electromagnetic compatibility, 9-5
Electronic module, 1-6, 3-1
Electronic modules, 3-5, 5-22, 5-24, 5-25, 5-26,
5-27
changing type, 5-25
Exchange, 5-26
identifying, 5-22
Mounting, 5-22
removing, 5-24
Removing and inserting during operation, 5-27
Electrostatic discharge, 9-5
EMC, 9-5
Emergency stop devices, 5-1
Emission of radio interference, 9-6
Error types
Channel-specific diagnostics, 8-31
ET 200S, 5-3, 5-5, 6-1, 6-10, 6-18
Characteristics and benefits, 1-9
configuration, 6-13
Configuration, 6-1
Overall configuration, 5-5
with grounded reference potential, 5-3
ET 200S components, 1-6
ET 200S distributed I/O system
Applications, 1-4
Definition, 1-4
Terminal modules and electronic modules, 1-4
View, 1-5
ET 200S FC
Variations in the technical specifications, 9-10
Example configuration of a fiber-optic cable network
with IM151-1 FO STANDARD, 5-17
Example of a configuration, 6-7
Exchange terminal box
on terminal module, 4-16
F
Feedback interface, 7-13
Fiber-optic cable
bending radius, 5-18
Order number, A-6
Fiber-optic duplex cable, 1-6
Operating Instructions, 12/2005, A5E00515771-03
ET 200S