Siemens Simatic ET 200S Operating Instructions Manual page 35

Components required
The figure below shows which ET 200S components you require for the example on the
PROFINETIO:
Figure 2-3
Order numbers for the example on PROFINET IO
Quantity
1 × Standard mounting rail 35 mm ( length = 483 mm, for example)
1 × IM151-3 PN interface module and terminating module,1 unit
1 × SIMATIC Micro Memory Card (e. g. 64k)
2 × Fast Connect terminal module TM-P15N23-A1, 1 piece
2 × Fast Connect terminal module TM-P15N23-A1, 5 pieces
2 × PM-E 24 VDC, 1 unit
1 × 2DI 24 VDC HF, 5 units
1 × 2DO 24 VDC/0.5 A HF, 5 units
PROFINET connector (according to the specifications in the
Installation Guide
Appropriate installation cables:
• FC Standard Cable
• FC Trailing Cable
• FC Marine Cable
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
Components for the example on PROFIBUS IO
Ordering data
)
Brief instructions on commissioning ET 200S
2.2 Commissioning on PROFINET IO
6ES5710-8MA11
6ES7151-3AA20-0AB0
6ES7953-8LF11-0AA0
6ES7193-4CC70-0AA0
6ES7193-4CA70-0AA0
6ES7138-4CA01-0AA0
6ES7131-4BB01-0AA0
6ES7132-4BB01-0AB0
PROFINET
6XV1 840-2AH10
6XV1 840-3AH10
6XV1 840-4AH10
Order number:
2-11