Siemens Simatic ET 200S Operating Instructions Manual page 214

General technical specifications
9.1 Standards and approvals
or
Underwriters Laboratories Inc. in accordance with
• UL 508 (Industrial Control Equipment)
• CSA C22.2 no. 142 (Industrial Control Equipment)
or
Underwriters Laboratories Inc. in accordance with
• UL 508 (Industrial Control Equipment)
• CSA C22.2 no. 142 (Process Control Equipment)
• UL 1604 (Hazardous Location)
• CSA-213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
The motor starters ET 200S have no cULus for HAZ. LOC approval
Note
You can find the currently valid certificates and approvals on the type plate of each module.
FM approval
Factory Mutual Research (FM) according
Approval Standard Class Number 3611, 3600, 3810
APPROVED for use in Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
The ET 200S motor starters do not possess FM approval. All other modules of the ET 200S
are FM approved.
In accordance with EN 50021 (Electrical apparatus for potentially explosive atmospheres;
type of protection "n")
9-2
II 3 G EEx nA II T4 to T5
Operating Instructions, 12/2005, A5E00515771-03
ET 200S