Siemens Simatic ET 200S Operating Instructions Manual page 243

Updating firmware for IM151-1 HIGH FEATURE
With
STANDARD.
To update the firmware you receive files (*.UPD) with the current firmware.
The following prerequisites must be fulfilled:
• The IM151-1 HIGH FEATURE in the station whose firmware is to be updated must be
• The files with the current firmware version must be available in the file system of your
You can find further information about the procedure in the
Note
Be sure to use the correct firmware version for the interface module you are using for the
update. An interface module with an older issue date can not be updated with the firmware
version for an interface module with a newer issue date and vice versa.
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
10.7 Interface module IM151-1 HIGH FEATURE (6ES7151-1BA01-0AB0)
STEP 7
V5.1, Service Pack 3 and higher, you can update the firmware of the IM151-1
accessible online.
programming device (PG)/PC.
Interface modules
STEP 7
Online Help.
10-21