Siemens Simatic ET 200S Operating Instructions Manual page 416

New Information About the "ET 200S Distributed I/O System Manual"
0 4.22 2AO I High Feature Analog Electronic Module (6ES7135-4MB02-0AB0)
Interface module
IM151-1 STANDARD
IM151-1 FO STANDARD
IM151-1 HIGH FEATURE
IM151-3 PN
IM151-3 PN HIGH FEATURE
IM151-7 CPU-F
IM151-7 CPU
IM151-7 CPU FO
Note
Use of the module after an IM151-7 CPU
If the module is positioned after an IM151-7 CPU, it outputs the last values before a RUN-
STOP transition, if no values were output by the user program after the STOP-RUN
transition.
Take this into account when programming the start-up of the control function (OB100 or
OB1).
3-22
Order no. [MLFB]
6ES7151-1AA04-0AB0
6ES7151-1AB02-0AB0
6ES7151-1BA01-0AB0
6ES7151-3AA20-0AB0
6ES7151-3BA20-0AB0
6ES7151-7FA01-0AB0
6ES7151-7AA11-0AB0
6ES7151-7AB00-0AB0
Product Information, 03/2006, A5E00743001-01
Product version
04
04
02
01
01
03
01
03
ET 200S