Evaluating The Interrupts Of The Et 200S - Siemens Simatic ET 200S Operating Instructions Manual

New Information About the "ET 200S Distributed I/O System Operating Instructions"
0

8.1.3 Evaluating the Interrupts of the ET 200S

T
Identification Data
Maintenance data 1: Index 2 (Data record 232)
TAG_FUNCTION
TAG_LOCATION
Maintenance data 2: Index 3 (data record 233)
INSTALLATION_DATE
RESERVED
Maintenance data 3: Index 4 (data record 234)
DESCRIPTOR
8.1.3 Evaluating the Interrupts of the ET 200S
0
"Process interrupt lost" Diagnostics
The "Process interrupt lost" diagnostics is not available for modules at present.
Note
Process interrupts should not be used for technological purposes (e.g. cyclical generation of
process interrupts).
If more than approximately 90 process interrupts are generated per second, process
interrupts may be lost.
2-2
Access Default setting
Read/write (32 -
bytes)
Read/write (22 -
bytes)
Read/write (16 -
bytes)
Read/write (38 -
bytes)
Read/write (54 -
bytes)
Explanation
Define a unique identifier for the module in
this record.
Enter the installation location of the module
here.
Enter the installation date of the module
here.
Reserved
Enter a comment on the module here.
Product Information, 03/2006, A5E00743001-01
ET 200S