Figure 5-15
①
Warning
Changes to the coding element can result in dangerous plant conditions.
Replacing a defective electronic module or COMPACT module
You have already removed the electronic module or COMPACT module:
1. Remove the coding element from the underside of the new electronic module or
2. Insert the new electronic module or new COMPACT module (same type) into the terminal
3. Label the new electronic module or COMPACT module.
See also
Incorrect configuration states of ET 200S on PROFIBUS DP (Page 8-50)
Switching on the ET 200S (Page 3-1)
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
5.5 Plugging and removing electronic modules and COMPACT modules
Removing the code element
coding element
COMPACT module.
module until you hear it snap into place.
Wiring and assembly
1
5-27