Interface Module Im151-1 Fo Standard (6Es7151-1Ab02-0Ab0) - Siemens Simatic ET 200S Operating Instructions Manual

Updating the firmware of the IM151-1 STANDARD
With
STANDARD (via accessible nodes).
To update the firmware you receive files (*.UPD) with the current firmware.
The following prerequisites must be fulfilled:
• The IM151-1 STANDARD in the station whose firmware is to be updated must be
• The files with the current firmware version must be available in the file system of your
You can find further information about the procedure in the
10.6

Interface module IM151-1 FO STANDARD (6ES7151-1AB02-0AB0)

10.6
Properties
The IM151-1 STANDARD interface module has the following features:
• It connects the ET 200S with PROFIBUS DP via the fiber-optic interface.
• The maximum parameter length is 244 bytes.
• The maximum address space is 128 bytes for inputs and 128 bytes for outputs.
• Operation as a DPV0 slave
• A maximum of 63 modules can be operated with the IM151-1 FO STANDARD.
• The maximum bus length is 2 m.
• Supports option handling and status byte for power modules.
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
10.6 Interface module IM151-1 FO STANDARD (6ES7151-1AB02-0AB0)
STEP 7
V5.1, Service Pack 3 and higher, you can update the firmware of the IM151-1
accessible online.
programming device (PG)/PC.
Interface modules
STEP 7
Online Help.
10-15