Siemens Simatic ET 200S Operating Instructions Manual page 80

Assembling
4.10 Applying slot number labels and color identification labels
Applying slot number labels and color identification labels
Applying slot number plates:
1. Break the slot number label (1 to 63) off the strip.
2. Use your finger to press the slot number label into the terminal module.
Applying color-coding plates:
1. You can twist off the color-coding plates directly from the strip onto the opening provided
2. Use your finger to press the color identification labels into the terminal module.
Figure 4-14
(1)
(2)
Removing slot number labels and color identification labels
Removing slot number plates:
1. Remove the electronic module from the terminal module.
2. Lever the slot number label out of its mount.
Removing color-coding plates:
Use a screwdriver to lever the color-coding plates from their mounts.
4-22
for them next to the terminal.
Applying slot number labels and color identification labels
Slot number label
Color identification labels
2
2 2
Operating Instructions, 12/2005, A5E00515771-03
1
2
ET 200S