Siemens Simatic ET 200S Operating Instructions Manual page 69

Installing additional terminals
1. Slide the additional terminal from underneath onto the terminal module for COMPACT
Figure 4-7
(1)
If your ET 200S modules are exposed to shocks or vibrations, the additional terminals can
be stabilized by means of the included fixing bracket.
1. Slide the fixing bracket into the slot in the underside of the additional terminal.
2. Screw the fixing bracket firmly onto the base.
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
modules or the TM-P and TM-E terminal modules.
Installing additional terminals
Catch
The under part of the fixing bracket can be snapped off and used to compensate for a
possible gap between the additional terminal and base by placing under the bracket (as a
spacer).
Assembling
4.5 Installing additional terminals
4-11