Using The Network Setting Menu - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Using the Network Setting menu

Use the Network setting menu to configure network-related settings for the VSP736. For
more information about these settings, see
"Advanced Network Settings" on page
To use the Network setting menu:
1. From the Admin Settings menu, press
then press SELECT.
The Network setting menu appears.
Network setting
1.IPv4
2.IPv6
3.VLAN ID
Back
2. Press
 IPv4




 IPv6



 VLAN ID
To set the network mode:
1. From the Network setting menu, press
or IPv6), and then press SELECT.
The selected network type screen appears (IPv4 menu shown below).
Configuration Using the Phone Menus
Select
 
or to highlight the desired option, and then press SELECT:
Mode (DHCP, Static IP, PPPoE, Disabled)
Set static IP
Set static DNS
Set PPPoE (Point-to-Point Protocol over Ethernet)
Mode (Disabled, Auto, Static IP)
Set static IP
Set static DNS
VSP736 Administrator and Provisioning Manual
"Basic Network Settings" on page 87
89.
 
to highlight Network setting, and
or
 
or to highlight your network type (IPv4
33
and
Back to Contents