Using an SD card
The micro SD card slot on the back of the VSP736 provides the following features:
Local call recording—allows the user to record a two-way conversation during a
call. The recording is stored in the available memory of the SD card.
You can configure local call recording on the desket menu, WebUI, and
configuration file. See
Recording" on page
Network trace
System log
Firmware upgrade—firmware upgrades can be loaded on the SD card for manual
firmware updates.
Configuration file import and export—the VSP736 configuration file can be
imported from or exported to the SD card for configuring other units or for system
backup.
You can view the SD card memory usage on the SD card menu (available on the deskset
User settings menu) or on the WebUI status page (see
Inserting and ejecting an SD card
The deskset will detect the SD card upon insertion. A splash screen indicating detection will
appear for two seconds.
11:09pm 01/25/14
Line
To eject the SD card:
1. When the VSP736 is idle, press MENU/SELECT.
2. On the Main Menu, press
MENU/SELECT.
3. On the User settings menu, press
MENU/SELECT.
Introducing the VSP736
"Using the Call Recording menu" on page 43
85.
SD card detected.
Line 1
CallFwd
Directory
Settings
to highlight User settings, and then press
VSP736 Administrator and Provisioning Manual
"Status Page" on page
to highlight SD card, and then press
24
and
"Local Call
49).
Back to Contents