security Module: Security Settings
All the security settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP736 Administrator and Provisioning Manual
security.hide_dtmf_enable
Enable or disable masking all DTMF digits entered during an Active Call.
0 (disabled), 1 (enabled)
security.hide_dtmf_delay_enable
Enable to add a one-second delay before DTMF digits are masked. By
default, the digits are masked immediately.
0 (disabled), 1 (enabled)
security.pwd_dial_enable
Enable to hide PIN numbers entered as part of the dial string.
0 (disabled), 1 (enabled)
security.pwd_dial_delay_enable
Enable to add a one-second delay before PIN numbers are masked. By
default, the PIN number is masked immediately.
0 (disabled), 1 (enabled)
security.pwd_dial_prefix
Enter the prefix that serves as an indicator that the next x digits are
masked (x being equal to the Password Dial Length).
Text string
security.pwd_dial_length
Enter the PIN number length. All digits within this length are masked. Any
digits beyond this length are not masked.
1–32
164
Default:
0
Default:
0
Default:
0
Default:
0
Default:
Blank
Default:
1
Back to Contents