Adding A Custom Logo; Logo Specifications; Uploading A Custom Logo - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Adding a Custom Logo

You can upload a custom logo to be displayed on the phone idle screen and during bootup.
Uploading a logo is done using the configuration file. The parameters for uploading a
custom logo are described in
bootup and idle mode is the vtech logo.
11:09pm 01/25/14
Line

Logo specifications

The file type and dimensions for the logo are listed below.
File type:
Dimensions (w × h): Idle screenlogo: 206 × 51 pixels
Positioning a custom logo on the screen is a matter of creating a logo with the maximum
dimensions listed above, including any surrounding white space. There are no
configuration file settings to specify the x-axis or y-axis position of the logo on the screen.

Uploading a custom logo

The file.bootup_logo and file.idle_logo parameters in the configuration file allow you to
upload a custom bootup logo and custom idle logo. Place the logos on your server and
enter the URL for each logo for the file.idle_logo and file.bootup_logo parameters.
If the downloaded logo is found to be invalid, the syslog will record one of the following
errors:
 file not found
 invalid file format
 incorrect image size
 image is not in black and white
Introducing the VSP736
"Uploading a custom logo" on page
Line 1
CallFwd Directory Settings
Monochrome bitmap (.bmp)
Bootup logo: 206 × 128 pixels
VSP736 Administrator and Provisioning Manual
20
20. The default logo for
Back to Contents