Basic Network Settings
If you disable DHCP on this page, you must configure static IP settings for the
VSP736. You must be familiar with TCP/IP principles and protocols to configure
static IP settings.
Basic Network Settings
Click the link for each setting to see the matching configuration file parameter in
Module: Network Settings" on page
IPv4
Setting
Disable
DHCP
Using the WebUI
VSP736 Administrator and Provisioning Manual
154. Default values and ranges are listed there.
Description
Disables all related IPv4 settings.
DHCP is selected (enabled) by default, which means the
VSP736 will get its IP address, Subnet Mask, Gateway, and
DNS Server(s) from the network. When DHCP is disabled,
you must enter a static IP address for the VSP736, as well
as addresses for the Subnet Mask, Gateway, and DNS
Server(s).
87
"network
Back to Contents