VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual page 51

Setting
User identifier
Authentication name
Authentication password
Dial Plan
Call Restriction Dial Plan
Emergency Dial Plan
Inter Digit Timeout (secs)
Maximum Number of
Calls
Page Auto Answer
Feature Synchronization
Line Type
Barge-in
DTMF method
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
Enter the User identifier supplied by your service provider.
The User ID, also known as the Account ID, is a SIP URI
field used for SIP registration.
Note: Do not enter the host name (e.g. "@sipservice.com").
The WebUI automatically adds the default host name.
If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Enter the dial plan, with dialing strings separated by a |
symbol. See "Dial Plan" on page
Enter a call restriction dial plan, which prevents users from
completing calls to certain numbers for this account.
Enter the Emergency Dial plan, which will apply to both
restricted calls (when the phone lock feature is set to
Emergency Call Only—see
page 40 and "Security" on page
Sets how long the VSP736 waits after any "P" (pause) in
the dial string or in the dial plan.
Select the maximum number of concurrent active calls
allowed for that account.
When set to Auto, enables the VSP736 to automatically
answer when a page is received. This is usually the desired
behavior for paging.
Enables the VSP736 to synchronize with Broadworks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
VSP736 menu and WebUI. Similarly, changes made using
the VSP736 or WebUI will update the settings on the server.
Select the line type to Private or Shared. A private line will
be accessible only at the VSP736 you are configuring.
Shared lines can be assigned to more than one VSP736.
For more information about using shared lines, see the
VSP736 User Guide.
Enables subscribers to shared lines to "barge in" on active
calls on other shared lines.
Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
51
53.
"Using the Security menu" on
118) and other calls.
Back to Contents