User Password; Phone Lock - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

User Password

You can set the user password on the WebUI or by using provisioning. For more information
on using provisioning to set the user password, see
page 209.
To change the User password:
1. Enter the old password (for a new VSP736, the default password is user).
2. Enter and re-enter a new password. The password is case sensitive and can consist of
both numbers and letters (to a maximum of 15 characters).
3. Click

Phone Lock

For more information about the phone lock feature, see
page 40.
Setting
Lock Type
Phone Unlock PIN
Auto Lock Timeout (secs)
Restricted Account
Using the WebUI
VSP736 Administrator and Provisioning Manual
.
Description
Unrestricted, Restricted Config, Restricted Call,
Emergency Call Only.
Enter the PIN that the user enters to unlock the phone.
Enter a timeout period in seconds. When the phone
becomes idle after being used in unlocked mode, the
phone automatically locks after the timeout.
Select the account to be used when Phone Lock is active.
119
"profile Module: Password Settings" on
"Using the Security menu" on
Back to Contents