VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual page 35

Set static IP
IP:
Subnet Mask:
Gateway:
DNS 1:
DNS 2:
Cancel
3. Press
enter characters. Press
4. Press
characters. Press
5. Press
the
character.
6. Press
this server if the primary server does not respond.
7. Press
To set static DNS:
1. From the Network setting menu, press
(whichever is in use in Static mode), and then press SELECT.
2. Highlight Set static DNS and then press SELECT. 
The Set static DNS menu appears.
Set static DNS
Static DNS:
DNS 1:
DNS 2:
Cancel
3. On the Set static DNS menu, press
4. Press
5. Press
6. Press
Configuration Using the Phone Menus
Backspc Add dot

and enter the Subnet Mask. Use the dial pad and the

or

and enter the Gateway. Use the dial pad and the Add dot soft key to enter
 
or to advance to the next character.

and enter the IP address for the primary DNS server. Use the dial pad and
Add dot soft key to enter characters. Press

and enter the IP address for the secondary DNS server. The VSP736 uses
.
Save
Disabled

and then enter the IP address for the primary DNS server.

and then enter the IP address for the secondary DNS server.
.
Save
VSP736 Administrator and Provisioning Manual
Save

to advance to the next character.
 
or
 
to highlight IPv4 or IPv6
or
Save
 
to set Static DNS to Enabled.
or
35
Add dot soft key to
to advance to the next
Back to Contents