ET605 User Manual
S
etting up the phone
D
elivery Content
A
ttaching and detaching the footstand
The footstand has four snap-fits, two narrower and longer ones and two wider and shorter ones.
Attaching
2
1
Fig 1
1. Insert the wider and shorter snap-fits into the holes marked (Fig. 1), as shown in steps 1 and 2 (Fig. 2).
2. Tilt the footstand upwards as shown in step 3 (Fig. 2) and insert the narrower and longer snap-fits into the
holes marked (Fig. 1). Please note that you will encounter a slight resistance when inserting the hooks.
Detaching
Lightly press downward on the free end of the footstand until the hooks on the two narrower/longer snap-fits
are released from the holes marked (Fig. 1), then pull the footstand upwards and away from the bottom shell
of the phone.
SILKSCREEN ARTWORK | ET605
Rosalyn Chun | 31 May 2018 | vision 2
Quick Installati on
Guide
ET605
1
2
Fig. 2
13
Setting up the Phone
- Base phone unit
- Footstand
- Handset
- Handset cord
- Ethernet cable
- Quick Start Guide
3