Xml Push Settings - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Setting
Timer Based
Timer Based Interval
Connected
Registration Event

XML Push Settings

Setting
Enable HTTP Push
Enable Push during call
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
The Timer Based URI will be triggered when the configured
timeout expires. The timer starts at the end of the phone boot
sequence.
Enter the interveral before the Timer Based URI is triggered.
The Connected URI is triggered each time the phone is in an
Active Call or is Paging.
The Registration Event URI is triggered every time there is a
registration state change. For example:
 Registered
 Deregistered
 Fail (Registration timed out, refused, or expired)
The Registration Event URI is not triggered when the same
event is repeated.
Description
Select to enable HTTP push, which enables the phone to
display XML objects that are "pushed" to the phone from
the server via http/https POST or SIP NOTIFY.
Select to enable the phone to display pushed XML objects
during a call. Otherwise, the XML application is displayed
after the call is over.
83
Back to Contents