System_Event Module: Action Uri Settings - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

system_event Module: Action URI Settings

You can enter Action URIs to allow the VSP736 to interact with a server application by using
an HTTP GET request. The action URI triggers a GET request when a specified event
occurs. Action URIs allow an external application to take control of the display when an
event occurs. For more information, see
All the Action URI settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP736 Administrator and Provisioning Manual
"Server Application" on page
system_event.startup.action_uri
Enter URI for GET request triggered at end of phone bootup.
Text string
system_event.registered.action_uri
Enter URI for GET request triggered at end of line registration.
Text string
system_event.on_hook.action_uri
Enter URI for GET request triggered when phone goes from active to idle.
Text string
system_event.off_hook.action_uri
Enter URI for GET request triggered when phone goes into dial mode.
Text string
system_event.incoming_call.action_uri
Enter URI for GET request triggered for incoming calls or call waiting
events.
Text string
system_event.outgoing_call.action_uri
Enter URI for GET request triggered when phone sends SIP INVITE
message.
Text string
199
Default: Blank
Default: Blank
Default: Blank
Default: Blank
Default: Blank
Default: Blank
80.
Back to Contents