Do Not Disturb; Call Forward; Call Completion - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Do Not Disturb

Setting
Enable DND
Incoming calls

Call Forward

Setting
Enable Call Forward
Always
Target Number
Enable Call Forward
Busy
Target Number
Enable Call Forward No
Answer
Target Number
Delay

Call Completion

When the user calls a busy number, the Call Completion feature enables the phone to redial
the busy number automatically. You can configure the redialing to take place after a set
interval and for a set number of times.
Call completion settings must be configured for each account.
Setting
Enable Call Completion
Enable Call Completion
Alert
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
Turns Do Not Disturb on or off.
When set to Show, the phone displays incoming call
information while Do Not Disturb is on. When set to Reject,
the phone rejects incoming calls without alerting the user.
Description
Enables or disables call forwarding for all calls on that line.
Select to enable.
Enter a number to which all calls will be forwarded.
Enables or disables forwarding incoming calls to the target
number if:
 the number of active calls has reached the maximum
number of calls configured for account x
 Call Waiting Off is selected.
Enter a number to which calls will be forwarded when Call
Forward Busy is enabled.
Enables or disables call forwarding for unanswered calls
on that line.
Enter a number to which unanswered calls will be
forwarded.
Select the number of rings before unanswered calls are
forwarded.
Description
Enable or disable the call completion feature. Calls to busy
numbers will prompt a "Retry later?" message on the
phone screen.
Enables or disables an audible alert (similar to a hold
reminder alert tone) if the user is on another call when the
auto redial interval expires.
65
Back to Contents