2. IP range specified with a pair of starting and ending IPv4 or IPv6 addresses, separated
by '-' (for example, 192.168.0.1-192.168.5.6).
No space before or after '-'
Both starting IP & ending IP have to be with the same IP version
Starting IP has to be smaller than the ending IP; otherwise, all traffic will be
dropped.
3. Single IP address in IPv4 or IPv6.
To ensure WebUI access after configuring Trusted IP, you must include the IP of
the Web Browser on the "Allowed IP" list.
Setting
Accept only allowed IP
for incoming requests
Allowed IP 1–10
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
Enable or disable using the "Allowed IP" list to filter all IP
traffic.
Enter IP addresses or address ranges to be used as
sources of authorized IP traffic.
122
Back to Contents