Resynchronization - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Resynchronization

Setting
Mode
Bootup Check
Schedule Check: Disable
Schedule Check: Interval
Schedule Check: 
Days of the Week
Start Hour
End Hour
Use encryption
Passphrase
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
Sets which files for which the VSP736 checks. It can check
for configuration files, firmware update files (from the URL
entered on the Firmware Server Settings page), or both.
Note: When checking for both configuration and firmware
files, the firmware URL can be within the config file. This
firmware URL takes take precedence over the URL on the
Firmware Server Settings page. It will also update the URL
on the Firmware Server Settings page. This allows you to
change the firmware URL automatically.
Sets the VSP736 to check the provisioning URL for new
configuration and/or firmware files upon bootup. The
update is applied as part of the reboot process.
When selected, disables regularly scheduled file checking.
Sets an interval for checking for updates. After selecting
Interval, enter the interval in minutes between update checks.
Select to enable weekly checking for updates on one or
more days. After selecting Days of the Week, select the
day(s) on which the VSP736 checks for updates.
Select the hour of the day on which the VSP736 checks for
updates.
Select the hour of the day on which the VSP736 stops
checking for updates.
Enables an AES-encrypted configuration file to be
decrypted before being applied to the VSP736. Select if the
configuration file has been secured using AES encryption.
See "Securing configuration files with AES encryption" on
page 134.
If the configuration file has been secured using AES
encryption, enter the 16-bit key. See
configuration files with AES encryption" on page
114
"Securing
134.
Back to Contents