Audio Module: Audio Settings - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

audio Module: Audio Settings

The audio settings include jitter buffer parameters and RTP port settings.
All the audio settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP736 Administrator and Provisioning Manual
audio.x.jitter_mode
Select the desired mode for the jitter buffer: fixed (static) or adaptive. This
setting depends on your network environment and conditions.
fixed, adaptive
audio.x.fixed_jitter.delay
When in fixed jitter buffer mode, set the delay (in ms) desirable to provide
good audio quality with the minimal possible delay.
30–500
audio.x.adaptive_jitter.min_delay
When in adaptive jitter buffer mode, set the minimum delay (in ms)
desirable to maintain data packet capture and audio quality.
20–250
audio.x.adaptive_jitter.target_delay
When in adaptive jitter buffer mode, set the target delay (in ms) desirable
to provide good audio quality with the minimal possible delay.
20–500
audio.x.adaptive_jitter.max_delay
When in adaptive jitter buffer mode, set the maximum delay (in ms)
desirable to maintain data packet capture and audio quality.
180–500
audio.x.rtp.port_start
Sets the Local RTP port range start.
1–65535
190
Default: adaptive
Default: 70
Default: 60
Default: 80
Default: 240
Default: 18000
Back to Contents