VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual page 47

a. When the VSP736 is idle, press MENU.
b. Press  to highlight Status, and then press SELECT.
c. With Network highlighted, press SELECT.
The Network screen appears.
d. On the Network screen, highlight the IP version in use: IPv4 or IPv6 and then
press SELECT.
e. On the IPv4 or IPv6 status screen, note the IP Address.
3. On your computer, open an Internet browser. (Depending on your browser, some of the
pages presented here may look different and have different controls. Ensure that you
are running the latest update of your preferred browser.)
4. Type the VSP736 IP address in the browser address bar and press ENTER on your
computer keyboard.
The browser displays a window asking for your user name and password.
5. For the user name, enter admin. For the password, enter the default password,
admin. You can change the password later on the WebUI Security page, available
under Servicing.
As a security measure, the WebUI prevents you from logging in for five minutes
after four (or three, depending on the browser's cache) consecutive failed log-in
attempts during a five-minute period.
6. Click OK.
The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click the links
along the left to view individual pages. For your security, the WebUI times out after 10
minutes, so if it is idle for that time, you must log in again.
Most WebUI configuration pages have a
you have made on the page. During a configuration session, click
move on to the next WebUI page.
The remaining procedures in this section assume that you are already logged into the WebUI.
Using the WebUI
IPv4
IP type: DHCP
IP: 10.88.51.133
Subnet Mask: 255.255.0.0
Gateway: 10.88.3.120
DNS 1: 10.88.126.31
DNS 2: 10.88.126.10
VSP736 Administrator and Provisioning Manual
button. Click
47
to save changes
before you
Back to Contents