Lldp-Med - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

Setting
VID
Priority
Enable PC Port VLAN
VID
Priority

LLDP-MED

Setting
Enable LLDP-MED
Packet Interval (secs)
802.1x
Setting
Enable 802.1x
Identity
MD5 Password
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
Enter the VLAN ID (vlan 5, for example).
Select the VLAN priority that matches the Quality of
Service (QOS) settings that you have set for that VLAN ID.
Outbound SIP packets will be marked and sent according
to their priority. 7 is the highest priority.
Note: Configuring QOS settings for your router or switch is
a subject outside the scope of this document.
Enable if the phone is part of a VLAN on your network.
Select to enable.
Enter the PC Port VLAN ID (vlan 5, for example).
Select the VLAN priority that matches the Quality of
Service (QOS) settings that you have set for that VLAN ID.
Outbound SIP packets will be marked and sent according
to their priority. 7 is the highest priority.
Note: Configuring QOS settings for your router or switch is
a subject outside the scope of this document.
Description
Enables or disables Link Layer Discovery Protocol for
Media Endpoint Devices (LLDP-MED). LLDP-MED is a
standards-based discovery protocol supported on some
network switches. It is required for auto-configuration with
VLAN settings.
Sets the LLDP-MED packet interval (in seconds).
Description
Enables or disables the 802.1x authentication protocol.
This protocol allows the phone to attach itself to network
equipment that requires device authentication via 802.1x.
Enter the 802.1x EAPOL identity.
Enter the 802.1x EAPOL MD5 password.
90
Back to Contents