Tone Module: Tone Definition Settings - VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual

tone Module: Tone Definition Settings

The Tone Definition settings configure data for various tones for the purpose of localization.
The Audio Manager component uses the data from this model to populate the mcu on
bootup.
Each tone definition must be at least one element containing a string of 12 element
attributes separated by a space:
"<num of freq> <freq1> <amp1> <freq2> <amp2> <freq3> <amp3> <freq4> <amp4>
<on duration> <off duration> <repeat count>"
Where:
<num of freq>: 0-2
<freq1>: 0-65535 (Hz)
<amp1>: -30–6 (dB)
<freq2>: 0-65535 (Hz)
<amp2>: -30–6 (dB)
<freq3>: 0 (for future development—modifying attribute has no effect)
<amp3>: 0 (for future development—modifying attribute has no effect)
<freq4>: 0 (for future development—modifying attribute has no effect)
<amp4>: 0 (for future development—modifying attribute has no effect)
<on duration>: 0-65535 (milliseconds)
<off duration>: 0-65535 (milliseconds)
<repeat count>: 0-65535
All the tone definition settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP736 Administrator and Provisioning Manual
tone.call_waiting_tone.num_of_elements
Sets the number of elements for the call waiting tone.
1–5
tone.call_waiting_tone.element.1
Defines the call waiting tone element 1.
Tone element string
203
Default: 1
Default: 1 440 -22 0 0 0 0 0 0 500 0 1
Back to Contents