VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual page 36

To set PPPoE:
1. From the Network setting menu, press
PPPoE mode), and then press SELECT.
2. Highlight Set PPPoE and then press SELECT. The Set PPPoE menu appears.
Set PPPoE
Username:
Password:
Cancel
3. On the Set PPPoE menu, enter the PPPoE account Username.
4. Press
5. Enter a password, if you are required to enter a PPPoE password.
6. Press
To set the VLAN ID for the VSP736:
1. From the Network setting menu, press
press SELECT.
2. On the VLAN ID menu, press
VLAN ID
WAN VLan:
WAN VID:
PC VLan:
PC VID:
Cancel
3. Press
characters. The valid range is 0 to 4095.
4. Press
5. Press
enter characters. The valid range is 0 to 4095.
6. Press
Configuration Using the Phone Menus
Backspc ABC Save

and then press Edit
Save .
Disabled
0
Disabled
0
Save

and enter the WAN VID. Use the dial pad and the
 
and then press or

and enter the PC port number. Use the dial pad and the
Save .
VSP736 Administrator and Provisioning Manual
 
to highlight IPv4 (which must be in
or
if you are required to enter a PPPoE account password.
 
to highlight VLAN ID, and then
or
 
or to enable or disable the WAN VLan.

to enable or disable the PC port VLan.
36
Backspc soft key to enter
Backspc soft key to
Back to Contents