VTech ErisTerminal SIP Deskset VSP736 Administrator And Provisioning Manual page 98

The filter <attribute>=* returns records containing the user-entered string anywhere in that
attribute. If gn=* is used for a firstname filter, entering "ar" returns records such as Karen,
Arnold, Gary, etc.
The filter (|(gn=%)(sn=%)) returns firstname and lastname records that start with the
user-entered string.
LDAP number filters give you the same control over number searches and matches. If for
example, you have defined the number attributes telephoneNumber, mobile and
otherPhone for Work, Mobile and Other numbers respectively, then the filter
(|(telephoneNumber=*)(mobile=*)(otherPhone=*)) will display the correct directory
information if the number (from an incoming call, or a dialed number) matches a number in
any three of those fields.
The filter telephoneNumber=* will display the correct directory information if the incoming
call number matches a number in the "Work" field only.
Setting
Enable LDAP
Directory name
Server address
Port
Version
Authentication scheme
Authentication name
Authentication password
Base
Maximum number of
entries
Maximum search delay
Using the WebUI
VSP736 Administrator and Provisioning Manual
Description
Enables or disables the phone's access to the LDAP
directory.
Enter the LDAP directory name.
Enter the LDAP server domain name or IP address.
Enter the LDAP server port.
Select the LDAP protocol version supported on the phone.
Ensure the protocol value matches the version assigned
on the LDAP server.
Select the LDAP server authentication scheme.
Enter the user name or authentication name for LDAP
server access.
Enter the authentication password for LDAP server access.
Enter the LDAP search base. This sets where the search
begins in the directory tree structure. Enter one of more
attribute definitions or LDAP field names, separated by
commas (no spaces). Your directory may include attributes
like "cn" (common name) or "ou" (organizational unit) or
"dc" (domain component).
For example: ou=accounting,dc=vtech,dc=com
Sets the maximum number of entries returned for an LDAP
search. Limiting the number of hits can conserve network
bandwidth.
Enter the delay (in seconds) before the phone starts
returning search results.
98
Back to Contents