2. To install the handset firmware, click
firmware. Please wait... appears. To cancel the download, click
After clicking
appears on the handset.
After a successful update, the message Firmware installation successful appears on
the WebUI.
An error message appears if:
the handset firmware is aleady up to date.
the handset firmware URL is incorrect, or the file cannot be retrieved for any other
reason.
the handset firmware file is corrupted.
the handset doesn't recognize the firmware file. For example, the firmware file may
belong to a different ErisTerminal product.
To install the firmware on the cordless handset:
1. On the handset, press MENU, and then select Admin settings.
2. Enter the admin password. The default is admin. To switch between entering upper or
lower-case letters, press the * key.
3. On the Admin settings menu, select Firmware update.
The handset checks for new firmware. If new firmware is found, the handset screen
asks you to proceed with the update.
Using the WebUI
VSP736 Administrator and Provisioning Manual
, the message System update in progress. Please wait...
110
. The message Installing handset
Back to Contents
.